|
|
|
 |
| Stinger Pro 250mw 5.8GHz AVD Transmitter[STP250] |
This product was added to our catalog on Saturday 28 June, 2008.
$169.95 |
|
|
|
 |
|
Item Description
Powerful, small, light and efficient. Stinger Pro 250 transmits NTSC or PAL/SECAM video, and 2 side channels at a full 250mw and provides outstanding range in the less polluted 5.8GHz band. The microphone input features extreme sensitivity, yet the built-in Automatic Level Control (ALC) microphone preamp assures excellent quality sound over very large changes in input volume. The second side channel may be used for line-level audio or medium baud rate serial data. Exclusive built-in battery saver for 2 and 3 cell LiPo's. Flexible input power, on-board switching power and dual side channels with preamp, make Stinger 5.8 Pro the most versatile transmitter in its class! Comes with whip antenna audio cable and one of these Plug & Play Power/Video Cables (See picture below) If you already have a camera that uses a 3 pin connector, please check the connector picture for wiring compatibility with your camera. If your camera is opposite of ours, please ask for a "REVERSE" cable when ordering or you will have to reverse it yourself.
All Iftron Transmitters are Urethane Conformal Coated for moisture protection.
Made in USA Lead Free See our Demo movie here
Specifications:
| | Size: | 1" x 1.5" x .25"
| | | Weight: | 0.5Oz (16g)
| | | Input Power: | On-board switching regulator. See chart below | | | Video Input:
| NTSC, PAL,SECAM 75 ohms
| | | Audio Mic Input:
| Condenser Microphone pads on baord
| | | Audio Line Input: | 1Vpp pads on board
| | | Connectors: | 1x6 pin power + camera, 1 x 3 pin audio+gnd
| | | Output Power:
| 250mw typical
| | | Antenna: | SMA Connector
| | | Camera Power:
| Battery voltage less about 1V
|
| |
|
 |
|
|
|
|
+++
